Request Quote >>

Pleated Filter

Pleated FiltersClassificationDescription
DP-g13een
Classified U.L. Class 2 per U.L. Standard 900
Moisture Resistant Beverage Board Frame
100% synthetic media
17.5 pleats per foot
MERV-13
May qualify as a Sustainable Component for LEED/Green Building Initiative
Low Initial Resistance for Energy Savings
Pleat Stabilizers
100% Adhesive Application
Maintains full MERV-13 in ASHRAE 52.2-2007
Heavy Duty Two Piece Beverage Board Frame
Meets LEED Green Buildng Criteria for Minimum Efficiency
X-treme Pleated Panel Filters
MERV-7 (Mechanical)
100% Synthetic Media
Self Supported
Damage Resistant
No Metal
Fully Incinerable
Boxed Pleat Tips
Additional Frame to Media Contact Points
Excellent Memory - No Pleat Deformation
100% Adhesive Application
Two Piece Frame Construction
Reinforced with Pleat Stabalizer Straps
DP Pleated Filters
1", 2", 4" Thicknesses
Die Cut Beverage Board
14.3 Pleats per Foot (2")
Low Initial Resistance for Energy Savings
Pleat Stabilizers
Uniformed Pleat Shape
100% Adhesive Application
Two Piece Frame Construction
DP Max
Same Construction as Standard Type DP
1", 2", 4", 6" Thicknesses
10 Pleats per Foot (2")
MERV-8
Low Initial Resistance for Energy Savings
Pleat Stabilizers
Uniformed Pleat Shape
100% Adhesive Application,
PowerGuard
1", 2", 4' Thicknesses
Die Cut Beverage Board
Super Charged, Electrostatically Enhanced Media
14.3 Pleats per Foot (2")
35-40% Efficiency, MERV-11
Needled Fibers Provide Higher Efficiency on Fine Particulate
Pleat Stabilizers provide Uniformed Pleat Shape
Side Access PowerGuard Filters Available
Exceeds Current Industry Specifications for Prefilters
DP4-SA - Side Access Filters
Same Construction as Standard Type DP
4" Thicknesses
1" Header on Top and Bottom is Designed for Installation in Side Access Systems
MERV-8
Media - 100% nonwoven synthetic fibers. The pleats are formed with a rigid welded wire grid laminated to the air leaving side to increase pleat stability
DP Class 1
Classified U.L. Class 1
1", 2", 4" Thicknesses
Non-Flammable Die Cut Board Frame
Ultrafine Fiberglass Media
Availble with Standard DP and DP Max Pleat Counts
35-40% Efficiency
Ultrafine microglass media with an expanded metal grid laminated to the air leaving side. A special fire retardant adhesive is used to seal the media pack inside the frame.
DP-HT - High Temperature
Operates up to 500°F
1", 2", 4", Thicknesses
Aluminized Steel Frame
Ultrafine Fiberglass Media
Available with Standard DP & DP Max Pleat Counts
35-40% Efficiency
Aluminized steel channel with a heavy duty expanded metal screen on the air leaving side to support the media pack in the frame.
Ultrafine microglass fiber with a high temperature woven scrim backing on the air leaving side. The pleats are formed with an expanded metal grid.
DP-65, DP-85, DP-95 High Efficiency
2", 4" Thicknesses
Die Cut Beverage Board
Ultrafine Fiberglass Media
Three Efficiencies 50-55%, 75-80%, 80-85%
DP-85, DP-95 Recommended for Low Velocity Applications
4" Thick DP-65 Provides Highest Efficency Available in a Pleated Filter Operating at 500 FPM (50-55%)
Ultrafine microglass media with an expanded metal grid laminated to the air leaving side. A special fire retardant adhesive is used to seal the media pack inside the frame.
For use where higher efficiency filtration is required. Recommended for systems
Mist-Defier High Moisture Pleated Panel Filters
Specifically Designed for High Moisture Conditions
2", 4" Thicknesses
100% Synthetic, Moisture Resistant Media
Two Piece Beverage Board Frame
Water Repellant Adhesive
Expanded metal backing
MERV-7
Mist-Defier Filters are designed for use in sea coast installations, rooftop units or other applications where filters are exposed to sensible moisture.